NCV-10

Needle control valve NCV-10

Line-up which is abundant in Compact-size, light weight, various liquid materials and uses

・Dispense stable with liquid material with filler.
・1 port Discharge pressure setting that conversion from syringe method is easily.
・2 port Discharge pressure setting which is suitable in high precision dispense more.
・Fluoric resin Specifications type that is suitable in dispense of corrosive high material and anaerobic liquid material, UV materials correspondence type are line-up.

Model NCV-10 (standard Specifications) NCV-10-T (fluoric resin Specifications) NCV-10-U (UV Specifications)
NCV-10-1P NCV-10-2P NCV-10-T-1P NCV-10-T-2P NCV-10-U-1P NCV-10-U-2P
Drive system Air operation rate type
The smallest dispensing volume 9μL 8μL 9μL 8μL 9μL 8μL
Adaptation viscosity … 50Pa, s
Operation air Supply pressure is 0.35 …
0.5MPa
0.3 …
0.5MPa
0.35 …
0.5MPa
0.3 …
0.5MPa
0.35 …
0.5MPa
0.3 …
0.5MPa
Liquid material Supply pressure range Up to 0.5MPa
Maximum reply number of times 640 times
/min.
680 times
/min.
640 times of /min. 680 times of /min. 640 times of /min. 680 times of /min.
Wetted part material Aluminum, SUS
Fluoric resin
Brass (Ni plating)
SUS (fluoric resin coat)
Fluoric resin
Polyacetal
Fluoric resin
SUS (fluoric resin coat)
Connection diameter Liquid material supply port Rc1/8 (Fluid feed successor places an order separately)
Liquid material discharge opening Lure lock
Operation air One-touch coupling (with speed controller) for external form φ 6 tube
Weight 140 g 160 g 120 g 140 g 120 g 140 g
Operating temperature limits 5~60 degrees Celsius
Adaptation liquid material Low to moderate viscosity
Overall liquid material
Anaerobic materials
Materials with filler
UV materials

※ Dispensing volume of this Specifications, adaptation viscosity, the biggest reply number of times, adaptation liquid material are reference levels.