Coating valve CV-10
Substrate coating of Moisture proof is realized high speed widely
・We realize uniform coating dispensing.
・There is not scattering, edge and edge face neatly
・By low flow quantity design, film dispensing is possible.
・It carries exclusive nozzle and applies extensive film formation
We realize this.
・It is stroked valve by micrometer calipers Equipped
Number management is possible of this.
Moisture proof coating dispensing to Substrate
|Drive system||Air operation rate type|
|Available viscosity range||～100mPa・s|
|Operation air pressure||0.35～0.5MPa|
|Maximum Fluid feed pressure||0.5MPa|
|Connection diameter||Liquid entrance||PT1/8||φ 6 X φ 4 Fluid feed coupling|
|Liquid discharge opening||Exclusive nozzle|
|Air operation port||External diameter φ 4 one-touch coupling (with speed controller)|
|Operating temperature limits||5～60 degrees Celsius|
|Weight||240 g||267 g|
|Wetted part material||Polyacetal, fluoric resin, SUS, ceramic|