Reduced voids for highest quality demands
The quality of electronic components can be significantly affected by voids. Voids are variable and can be found in different places in varying degrees. These air inclusions can also expand when the unit is powered – in other words when it generates heat. This can have serious consequences under certain circumstances: Incorrect values from sensors go unnoticed, heat dissipation no longer functions correctly, thereby leading to earlier failure of the components – with physical destruction of small and light elements in the worst case scenario.
With the dispensing and coating systems of the Protecto series and the RDS VAC, Rehm Thermal Systems has a compact complete line for the highest product quality requirements in its portfolio. Ranging from material preparation, the dosing system optimally matched to the application, through to vacuum extraction for eliminating air bubbles: Rehm supplies everything from a single source and can draw on many years of experience in the field of vacuum technologies.
The precision dosing needle of the Protecto brings the material so close to the edge of the component that the capillary force pulls the protective coating under the component. Since air inclusions cannot be completely ruled out in this process despite all the precision, these are then reduced to an absolute minimum in the vacuum chamber of the RDS VAC. The result is a highly reliable assembly. With a vacuum value between 100 mbar and 10 mbar, pore area fractions of less than 2 % can be realised with the RDS VAC. The pressure curve and the speed at which the vacuum is pulled can be set individually.
At Bondexpo in Stuttgart, the leading trade fair for bonding technology and an important industry meeting place for all aspects of industrial joining and bonding, Rehm Thermal Systems will be presenting its product portfolio in the areas of dispensing, bonding techniques and application processes from 5 to 8 October. See for yourself – at the Rehm stand in Hall 5, 5508.