XTC-520-S7

Ultra-low relative humidity ≤0.5%RH guaranteed with XTC-520-S7 Dry Cabinet

X-Treme Series Desiccant Dry Cabinet has been specifically designed for drying and storing moisture sensitive devices (MSDs). According to IPC/JEDEC J-STD 033C and IPC-1601 standards, moisture-sensitive materials and PCB’s can be stored in these cabinets for an unlimited period of time. XTC-520-S7 Model Desiccant Dry Cabinet is suitable for medium and high-volume production due to cabinet dimensions also it can be used for baking (floor life resetting) purposes. In addition to the XTC-520-01 base model cabinet, XTC-520-S7 model has indoor light, heating up to 60ᵒC, and outdoor sensor features. It is one of the most used cabinets due to its ergonomic structure and high volume. The XTC-520-S7 Desiccant Dry Cabinet is equipped with 2 patented drying units DHM-01. The patented DHM-01 desiccant drying units guarantee constant low relative humidity ≤0.5%RH for short to long-term storage thus oxidation risks associated with long term storage can be avoided. Ideal for the moisture-proof and anti-oxidation storage of wide-ranging technologies.

Some advantages of XTC-520-S7 Desiccant Dry Cabinet

The drying unit of X-Treme Series Auto Dry Cabinets operating at very low humidity levels and heating units work together to provide a fast and healthy baking process at low temperatures for floor life resetting process. It provides a larger area and a more controlled drying environment compared to traditional ovens. Low-temperature baking prevents problems such as delamination, micro-cracks, popcorn affects, and solderability in MSDs (Moisture Sensitive Devices) arising due to high-temperature stress on the materials after baking in traditional ovens.

Desiccant dry cabinets with double dryer units provide a fast, reliable, and uninterrupted drying process by enabling the drying units to work together in a comprehensive algorithm. In case of any malfunction, the dryer units back up each other and continue the drying process. All parameters related to dehumidification can be adjusted and monitored on the touch screen control panel. Especially in production environments where doors are opened and closed at very frequent intervals, such as in mass productions, these cabinets are used to keep the humidity at the desired level.

Equipped with high-end technologies

The touch screen control panel provides 800x480px resolution in 7″ touch-capable area. The user can reach all important data in the cabinets with simple clicks. X-Treme Series Auto Dry Cabinets fully network compatible, it can be reached remotely via computers, phones, and tablets which are using Wi-Fi and ethernet connections. The cabinets are equipped with high-precision sensors and integrated data logger for performance traceability.

X-Treme Series Auto Dry Cabinets are ESD Safe and conforms to the current ESD 61340-5-1 standards.

Standard Features

  • 2 ea Dehumidifier Units

  • Indoor Light (XT-LGK-01)

  • Heater Kit (60 °C) and Double Wall Thermal Insulation and (SS) Panels All Sides (XT-HTK-02)

  • Internal Humidity and Temperature Sensor

  • Outside Humidity and Temperature Sensor (HTS-02)

  • 7” Touch Screen Control Panel, 800*480 Pixel Screen Resolution

  • Internet Connection by Wi-Fi or Ethernet Cable

  • Remote Monitoring System (RMS)

  • Datalogger (2GB)

  • 10 x Stainless Steel (SS) Shelves

  • Door Alarm with Buzzer

  • 4 Door Double Insulated Glass

  • Rear Stainless Steel (SS) Panels

  • 4 x Casters (2 of them are lockable)

  • Adjustable Stabilization Legs 2 pcs

  • Electrostatic Painted Metal Sheet Body – 1250 Liters Net

     

Additional Features

  • Heater Kit (45 °C)-(XT-HTK-01)

  • Heater Kit (100 °C)-(XT-HTK-03)

  • Stainless Steel (SS) Shelf (SSS-01)

  • Stainless Steel (SS) Sliding Shelf (SD-01)

  • Automatic Door Locks by Password (DLK-04)

  • Two Door Option for XT Line (XT-DR2-01)

  • RFID Access (RF-01)

  • MSD (Moisture Sensitive Device) Traceability Software (MSDTrack)

  • PCB Holder (PCB-01)

  • Stainless Steel (SS) U Divider (XT-DSSU-03)

  • Stainless Steel (SS) I Divider (XT-DSSI-04)

  • Stainless Steel (SS) SMD Reel Holder with 20 Divider Wire (SMDD-01)

  • Extraction Unit (XT-EXT-01)

  • External Alarm Bar with Magnetic Base, 2-Color Light and Buzzer (EAL-01)

  • N2 Auto Flow System (N2AF-01)

  • Cooling Unit (COAF-01)

  • Humidifier Unit (HUM-01)

  • Hepa Filter Option-Class 1000 (ISO 6)(HEPA-01)

  • Custom Sliding Feeder Storage Solutions for XT Line (XT-FS-01)