StripCrimp 200
Stripping and Crimping Machine
Get to know one of the most flexible stripper-crimper machines: The fully programmable StripCrimp 200. This machine is most suitable for high precision stripping and subsequent crimping of side- or rear-feed terminals for wires between 0.05 – 4.00 mm² (30 – 12 AWG). The strip and crimp machine, StripCrimp 200, captivates with great flexibility and user-friendly operation. The machine is highly suitable as a semi-automatic stripper-crimper or within fully automatic transfer systems and runs quickly, quietly and safely.
- Fully programmable stripping unit with wayback and recut function
- Economical & user-friendly
- Quick-release applicator base plate for easy changeover
- Job memory for all cable parameters and functions
- Split cycle capability for closed barrel contacts
All stripping parameters and special functions can be programmed and saved:
- Wire cross section, correction value, wayback, recut, stripping length, stripping position, multi-step-stripping, press speed
- Counter function, language, unit of measurement, CFM activation, pneumatic terminal feed, operating mode (only stripping, only crimping, stripping and crimping), password, diagnostic function
- Active slug removal
- Quick-change applicator base plate
- Jogging function (left/right) with home position display and automatic home position function
- Fine adjustment of crimp height (micro-adjustment)
The programmable StripCrimp 200 is designed for high precision stripping and crimping of side- or rear-feed terminals for wires between 0.05 – 4.00 mm² (30 – 12 AWG).
Processing Capabilities
- Discrete wire crimping
- Discrete wire stripping
- Discrete wire stripping & crimping
- Multi-conductor cable crimping
- Multi-conductor cable stripping
- Multi-conductor cable stripping & crimping
Options
- Pneumatic valve to activate pneumatic crimp applicators
- Crimp force monitoring
- Short outer jacket stripping kit (assembled on UNI-A crimp applicator)
- Carrier strip cutter
- Terminal oiler
- Paper winder
- Work light
| Conductor Cross-Section | 0.05 – 4.0 mm² (30 – 12 AWG) |
| Raw Material Diameter | Up to 6.3 mm ( 0.25”) |
| Crimping Force | 33 kN (3.7 tons) |
| Stroke | 40 mm (1.575”) |
| Shut Height | 135.788 mm (5.3460”) |
| Crimp Height Adjustment | ± 0.25 mm (0.01”), in increments of 0.025 mm (0.001”) |
| Strip Length | 0.5 – 15 mm (0.02” – 0.59”) |
| Wayback | Programmable, 0 – 2 mm (0 – 0.08″) |
| Recut | 0 – 4 mm (0 – 0.157”) |
| Breakout | Minimum 19 mm (0.75″) application dependent (for jacketed cables) |
| Cycle Time | < 0.9 s for stripping and crimping Crimp cycle time programmable from 350 ms to 1 s |
| Clamping | Clamping force adjustable with pneumatic pressure regulator |
| Memory Capacity | 100 |
| Noise Level | <70 dB (A) |
| Power Rating | 0.75 kW |
| Power Supply | 115 VAC – 230 VAC, 50/60 Hz |
| Dimensions (L x W x H) | 350 x 350 x 710 mm (13.8 x 13.8 x 28.0”) |
| Weight | 90 kg (198 lbs.) |
| CE-Conformity | The StripCrimp 200 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility. |