
Curved Surface – SC07 Type
Features
Optimized slit die
Curved Free-Form
Coating width variable slit coater
Curved Surface – SC07 Type
Item
|
Specification
|
Remark
|
---|---|---|
Table Size
|
(W)300mm x (D)600mm
|
|
Target Size
|
Small size~15inch
|
Flat and Curved
(Assumption: R500~ R1000) |
Coating Thickness
|
50µm-800µm
|
Value with Flat Surface
|
Coating Thickness Accuracy
|
50µm-100µm: ±10µm
100µm-800µm:±10% |
Value with Flat Surface
Value with Flat Surface |
Slit Nozzle Coating Width
|
Max: 200mm
|
|
Slit Nozzle Mobility Width
|
Mobility range: ±30°
(Equivalent to R500) |
|
Work Piece Suction Method
|
Vacuum
|
|
Workable Viscosity
|
1000~150000mPa・s
|
|
Curved Free-Form
Item
|
Specification
|
Remark
|
---|---|---|
Table Size
|
(W)300mm x (D)600mm
|
|
Target Size
|
Small size~15inch
|
Flat and Curved
(Assumption: R500~ R1000) |
Coating Thickness
|
50µm-800µm
|
Value with Flat Surface
|
Coating Thickness Accuracy
|
50µm-100µm: ±10µm
100µm-800µm:±10% |
Value with Flat Surface
Value with Flat Surface |
Slit Die Coating Width
|
Variable width: 100~200mm
|
Extensible
|
Slit Die Swing area
|
Swing range: ±30°
(Equivalent to R500) |
|
Work Piece Suction Method
|
Vacuum
|
|
Workable Viscosity
|
1000~150000mPa・s
|
|
Multi-Device
Item
|
Specification
|
Remark
|
---|---|---|
Coating width
|
100~200mm
|
Extension available
|
Resin thickness
|
50μm-800μm
|
|
Resin thickness precision
|
50μm-100μm: ±10μm
100μm-800μm: ±10% |
|
Available viscosity
|
1,000~15,000mPa・s
|
|
In-house comparison with conventional machine
Conventional machine: Shim exchange 180 min.
Multi-Device Slit Coater: Motor exchange within 1min.
Task
|
In case of using each head matching the model
|
In case of using Multi-Device Slit Coater
|
---|---|---|
Removal of head
|
4min
|
No need
|
Disassemble of head and cleaning
|
No need
|
No need
|
Re-assemble of head (Exchange of shim)
|
No need
|
No need
|
Set up of head
|
5min
|
No need
|
Replacementand degas of resin
|
5min
It’s necessary in advance to refill the resin in the replaced head |
No need
|
GAP
Confirmationand adjustment of GAP |
3min
|
No need
|
Change of operation recipe
|
Recipes are automatically switched based on model information from external devices such as barcodese
|
Recipes are automatically switched based on model information from external devices such as barcodes
|
Confirmation of coating conditions
|
5min
(It depends on the items to confirm) |
5min
(It depends on the items to confirm) |
Total
|
22min
|
5min
|
Slit Coater – SC02
Item | Specifications | Remark | |
---|---|---|---|
Machine size | W1200 x L1550 x H2000, 800kg | ||
Utility | AC200-220, 3Φ, 30A, CDA, Vacuum | CDA(for resin feed ) Vacuum(for Chucking) | |
Substrate | Max 420mm x 300mm x t0.5-20mm | ||
Unit | Slit die | Width: Max. 400mm | |
Stage drive | By servo motor, speed control: 3-400mm/sec | ||
Resin pump | Gear Pump: Viscosity: max 6,000cp | (Option) Heishin pump (Viscosity max 1,000,000cp) |
|
Cleaning Unit | Roller Type | ||
Gap Control | Gap Control by substrate thickness sensor | ||
Coating spec. | Thickness | 50~300um (ING record) | |
Uniformity | +/-10%(ING record) | ||
UV-Cure | LED Type, 405nm, L400mm (Loctite 97668, x5set) | ||
Resin supply | Tank x2 | ||
Ctrl, Mam-Machine Interface | PLC, Touch panel | ||
Coating condition setting | * Start point:Gap, Speed, Resin feeding volume, timing * Middle point:Gap, Speed, Resin feeding volume * End point:Gap, Speed, Resin feeding volume, |