SCH-UniStrip2550

UniStrip 2550

Stripping Machine

The Schleuniger UniStrip 2550 strips wires ranging in size from 0.03 – 6 mm² (32 – 10 AWG) and jacketed cables up to 5.5 mm (0.22″) in diameter. The machine comes standard with V-blades, the optimum solution for stripping most wires without having to change blades. Through the use of special blades, the range of applications can be expanded. Using the color touchscreen, the operator selects the desired wire size from the preprogrammed library and all parameters (cutting diameter, clamping pressure, blade way back, etc.) are automatically set. The operator edits the stripping and pull-off lengths as required and the machine is ready for operation. The UniStrip 2550 begins the stripping process when the wire end touches the trigger sensor. The wire is automatically clamped and the stripping process is performed according to the programmed values. If desired, the program can be saved to internal memory for future use.

The UniStrip 2550 is a fully programmable stripping machine, offering high precision and flexibility. It strips wires ranging in size from 0.03 – 6 mm² (32 – 10 AWG) and jacketed cables up to 5.5 mm (0.22”) in diameter. The machine comes standard with V-blades, the optimum solution for stripping most wires without having to change blades. The UniStrip 2550 can also be equipped with radius, die or flat blades, depending on the application. These special blade types are used for stripping wires with difficult to strip insulations such as Teflon, Kapton, Kynar, etc., typically used in the military and aerospace industries.

  • Intuitive color touchscreen user interface
  • No mechanical adjustments required when using V-blades
  • Very sensitive trigger sensor – works great for small, flexible wires
  • Operator has clear view of the entire working area
  • Various blade types available
  • Barcode scanning function

Programmable Processing Parameters

  • Pull-off speed
  • Stripping lengths partial strip
  • Stripping lengths full strip
  • Stripping diameter
  • Wayback (opens blades slightly before pulling off)
  • Feed rate of the stripping blades
  • Cable clamping force

Material

  • Cable
  • Discrete Wire
  • Flat Cable
  • Flat Ribbon Cable
  • Kapton
  • Multi-conductor Cable
  • PUR
  • PVC
  • Rubber
  • Single Conductor Cable
  • Solid Wire
  • Stranded Wire
  • Teflon®
  • Tefzel®
  • Wire

Processing Capabilities

Die-blade functionality/capability

Discrete wire processing

Flat or zipcord cable processing

Full strip

Multi-conductor cable processing

Multi-step stripping

Partial strip

Conductor Cross-Section 0.03 – 6 mm² (32 – 10 AWG)
Raw Material Diameter Maximum 5.5 mm (0.22″)
Diameter Increments 0.01 mm (0.001″)
Strip Length Minimum 0.5 mm (0.02″)
Maximum 43 mm (1.69″)
Pull-Off Length Maximum 22 mm (0.86″)
Strip Length Increment 0.1 mm (0.01“)
Cycle Time 0.35 s (0.75 mm² (18 AWG) wire, stripping length 10 mm (0.39″), pull-off length 5 mm (0.19″))
Cycle Start Automatic trigger sensor or optional foot pedal
Raw Material Type PVC, PUR, rubber, Teflon, Tefzel, Kapton, etc.
Clamping Programmable clamping force
Memory Capacity 1,000 wires or cables (memory function available only with «extended wire»)
Interfaces Foot pedal, USB «Host»
Options Foot pedal, special clamping jaws
Noise Level <70 dB (A)
Power Supply 100/115 VAC, 230/240 VAC, 65W / 50/60 Hz
Dimensions (L x W x H) 390 x 130 x 280 mm (15.3″ x 5.1″ x 11.0″)
Weight 9.4 kg (21 lbs.)
CE-Conformity The UniStrip 2550 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.