SCH-TTP 4000

TTP 4000

Thermal Transfer Printer

The TTP 4000 is a programmable thermal transfer printer for the highest quality printing results. Its innovative printing process allows marking of cables with text, barcodes and graphics (e.g. logos) in excellent resolution for maximum readability. Additionally, the TTP 4000 is very user-friendly and can be fully integrated in automatic processing lines or alternatively be operated as a stand-alone benchtop printing unit.

Its innovative printing process allows automatic processing of cables with an outer diameter from 2 – 15 mm (0.08“ – 0.6“) with outstanding results. The thermal transfer printing process of the TTP 4000 opens up a whole range of wire marking possibilities: from text to barcodes and graphics, such as logos – all in excellent resolution for maximum readability.

  • Marking of cables with text, barcodes and graphics (e.g. logos)
  • Circumferential marking possible
  • Can be operated as stand-alone benchtop unit or be integrated in automatic processing lines
  • Simple programming

Marking Possibilities

  • Date fields
  • Consecutive numbering
  • Logos / graphics
  • Single-line text
  • Multi-line text
  • 2-side marking
  • Special characters

Function

The TTP 4000 combines two main processes in a single unit to achieve high quality abrasion-resistant printing results. In the first step, a transfer foil with the elements to be printed (text / graphics) is prepared. Subsequently those elements are printed on the cable in a hot stamp marking process. A special roller mechanism allows marking 360° around the cable. One of the benefits of circumferential marking is a significantly better readability as font sizes can be increased compared to conventional printing methods. Cables can also be marked on both sides if needed.

Simple Programming

  • Full integration with Cayman PC software
  • Simple import of graphics (PCX)
  • Entry of all parameters via panel, external keyboard or laptop possible
Raw Material Diameter 2 – 15 mm (0.08“ – 0.6“)
Marking Length Maximum 80 mm (3.15“)
Marking Height Maximum 20 mm (0.79“) (in roller mode)
Thermofoil Size 86 mm x 300 m (3.38“ x 328.08“)
Receptor Slide Size 100 mm x 150 m (3.93“ x 164.04“)
Foil Consumption 3 – 30 mm (0.12“ – 1.18“) (depends on size and font)
Marking Colors Black, white other colors available on request
Marking Process Stamp mode or roller mode
Compressed Air Connection 5-6 Bar, non-oiled, dried and filtered compressed air
Power Supply 1L / N / PE AC 240 V 50 Hz or 1L / N / PEAC 110 V, 60 Hz
Interfaces RS 232, Parallel Interface or Ethernet
Dimensions (L x W x H) 330 x 700 x 380 mm (13 x 27.56 x 14.96″)
Weight 33 kg (72.75 lbs.)
CE-Conformity The TTP 4000 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Important Note Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.