SCH-HotStamp4140

HotStamp 4140

Hot Stamp Marking Machine

The HotStamp 4140 is designed for economical, high quality marking of wires, cables and tubing. Character combinations and character sizes are freely selectable. Although primarily used for marking wires and cables, the HotStamp 4140 is suitable for marking all sorts of thermoplastic materials.

The Schleuniger model HotStamp 4140 is designed for the economical and high quality marking of wires and tubes. The combination of characters and character size can be selected freely within the specific range. The hot stamp marking process is suitable for marking thermoplastic materials. During the process the preheated character wheels imprint the precision-engraved characters by pressing the pigmented marking foil into the selected material. The concave form of the characters is exactly matched to the diameter of the processed material. The precise adjusting options for the stamping pressure and time and the marking temperature allow to recall every result.

  • Schleuniger HotStamp Marking Systems are designed for use with Schleuniger cut and strip equipment. The characters of the character wheel can be changed quickly with the index system and contribute to the high economic efficiency
  • Without having to change the character wheels it is possible to realize up to 25-digit markings in alpha-numeric characters
Raw Material Diameter 1 – 12 mm (0.04″ – 0.5″)
Marking Pressure Adjustable from 0.1 to 0.7 MPa (1-7 Bar) / 15-105 psi
Marking Temperature Adjustable from 0° to 160° C (32° –345° F)
Stamp Time Adjustable from 0.1 to 3.0 s
Compressed Air Connection 0.7 Mpa (7 bar) / 100 psi
Options Foot pedal / Standard and customized types / Interface cables for in-line operation
Number of Wheels Maximum 25
Characters per Wheel 40 characters per wheel (all alphanumeric characters)
Character Size Horizontal: 1.2 / 1.5 / 1.6 / 1.7 / 1.8 / 2.0 / 2.1 / 2.2 / 2.5 / 2.7 mm
Vertical: 1.2 / 1.6 mm
Marking Foil Foil material: PVC-Foil, Teflon-Foil
Foil colors: black, white; on request: red, yellow, green, blue
Power Supply 115 VAC, 230 VAC, 200 VA, 50-60 Hz
Dimensions (L x W x H) Marking unit: 180 x 240 x 250 mm (7 x 9 x 10”)
Control unit: 390 x 220 x 80 mm (16 x 9 x 3”)
Weight Marking unit: 10 kg (22 lbs.)
Control unit: 5 kg (11 lbs.)
CE-Conformity The HotStamp 4140 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Important Note Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.