SCH-EcoCut 3200

EcoCut 3200

Cutting Machine

The EcoCut 3200 is an automatic cutting machine for measuring and cutting round material. It can be equipped with either a tube cutting head or a universal cable cutting head. The tube cutting head can process tubing up to 12.7 mm (0.5″) O.D. with outstanding quality. The universal cable cutting head can process wire, cable and tubing up to 10 mm (0.39″) O.D. The EcoCut 3200 can be used as a stand alone machine or it can be integrated into a processing line. The EcoCut 3200 is electronically controlled and features several interfaces for peripheral components. The electrically driven rollers feed the material to the cutting unit. The cutting unit is electrically driven and position controlled.

The newest automatic cutting machine from the Schleuniger product family is the EcoCut 3200, which can be configured according to individual needs and allows users to measure and cut cables, wires and tubes.

  • Unique Tube Cutter Principle (double cutting mode)
  • Precise & repeatable results
  • Easy to program and operate (menu-guided)
  • Excellent price/performance ratio
  • Fast and quiet transport system
  • Cutter heads can be changed in less than one minute
  • High output rate due to double cut system
  • Fast and very quiet transport unit
  • Easy, menu guided operation and programming
  • All-electric operation

Processing Capabilities

Round cables, Profiles


Wire marking

Raw Material Diameter Tube Cutting Head Max. 12.7 mm (0.5”)
Cable Cutting Head Max. 10 mm (0.39″)
Conductor Cross-Section Stranded Wire Max. 6 mm² (8 AWG)
Solid Wire Max. 4 mm² (12 AWG)
Length Increment 0.1 mm (0.004″)
Feed Rate Maximum 3.20 m/s (10.6 ft/s)
Interfaces Standard: Prefeeder, Hotstamp, RS232, Foot Pedal
Optional: Postfeed-Interface (CableCoiler 500)
Options Tube guides in 0.5 mm increments from 2.0 – 13 mm. Custom tube guides, Custom blades
Noise Level <70 dB (A)
Power Supply 100 V, 115 V, 230 V or 240 V (50 – 60 Hz)
Dimensions (L x W x H) 400 × 250 × 260 mm (15.7” x 9.8” x 10.2”)
Weight 17 kg (38 lbs.)
CE-Conformity The EcoCut 3200 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Important Note Schleuniger recommends that wire / tube samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.