REHM Securo

Safely at the right quality ­– with Securo systems from Rehm

Testing and measuring methods are increasingly becoming standard in the automotive industry in particular, for analysing the resistance of integrated parts and increasing the service life of electronic components in the long term. Any failure or series fault is associated with high costs and far-reaching consequences.

Rehm Thermal Systems developed the Securo Plus system for the hot function test and Securo Minus for the cold function test. The systems operate in normal air or in nitrogen atmospheres.

To test the winter performance of sensitive electronics, functional modules are first cooled to temperatures of -45 °C. However, to simulate the installation environment in a vehicle, the modules are heated to +80 °C to +120 °C.

The Securo systems are highly compatible with other measuring equipment. This allows extensive function monitoring and secure quality control. The best analysis and documentation tools provide for transparent processes.

Unique technology advantages

  • Analysis of resistance of sensitive electronics in extreme temperatures
  • Optimal combinations of systems with other measuring Equipment
  • Excellent insulation values due to foamed housing
  • Excellent heating or cooling capacity
  • Sealed compressor for low noise Level
  • Easy access and minimal maintenance
  • Systems available as batch or in-line variant

Securo overview

Rehm Securo systems offer you complete flexibility and security in the design and implementation of your test tasks. A stable product carrier circulation ensures a safe journey through the system and total process stability. At the same time, Securo systems have enough intake capacity to reliably temper even large parts at the desired test temperature in a short cycle time.

Temperature ranges

The Securo systems from Rehm are designed for a wide temperature range from -55 °C to +120 °C. As a result, a wide range of environmental conditions can be simulated. With the best insulation, these systems provide optimal heating or cooling of the components.

Easy maintenance

Our cold and hot function test systems are easily accessible. The climate chamber is easy to open and can be easily maintained. In addition, bevelled steel panels are installed inside the system. These allow the condensate, which inevitably arises during the process, to drain off, leaving the climate chamber clean and dry. Our customers benefit from minimal downtime and low maintenance requirements.

Flexible system configurations

Flexibility characterises contemporary manufacturing. Our Securo series is modular and can be integrated into your production environment in-line or fully interlinked as a stand-alone application. With the in-line system, the selective heating and/or cooling and the subsequent temperature measurement takes place consecutively in a single work step, while with the stand-alone application, the heating and/or cooling and the testing are reliably carried out in multiple work steps.

In-line

Stand-alone application

Can be integrated into any production environment

All Securo systems have flexible loading and unloading options. In batch mode, loading/unloading is possible from the left or the right, while with an in-line system it can be two-sided.

An interchangeable carrier system makes processing different assembly shapes and geometries easy, regardless of whether you are planning a small and medium series with manual loading or wish to implement a large series with automatic part handling. A test system can thus be installed downstream, to allow the reliability of the warmed or cooled assembly to be checked immediately afterwards.