PreFeeder 3200

PreFeeder 3200

Prefeeding Machine Puller Type

The belt driven puller feeder type can pull wires and cables from a spool. The system is available with different accumulator systems:

Pendulum arm accumulator for high dynamic feeding

Loop limit control for rigid cables

Inlet pendulum arm for smoothly acceleration of the spool

Customer Benefits

  • Adaptable for various applications and cable types
  • Easy handling and high feeding dynamics for efficient production
  • Integrated circuits for safety operation
  • Prefeeding by pulling directly from a spool
  • Flexible and / or rigid wires and tubes up to 35 mm (1.38“)
Raw Material Diameter 35 mm (1.38”)
Pulling Force 330 N (73 lbf)
Feed Rate 0 – 2.5 m/s (0 – 8.2 ft./s)
Power Supply 100/115 VAC, 60 Hz, 230/240 VAC, 50 Hz, 850 Watt
Compressed Air Connection 6 bar (90 psi)
Accumulator Storage Capacity 1,800 mm (70.8“) with 2 loops or 900 mm (35.4”) with 1 loop, depending on cable stiffness
Weight 150 kg (330 lbs.) Base machine
20 kg (44 lbs.) Inlet Accumulator
20 kg (44 Ibs.) Accumulator speed control 1
0 kg (22 lbs) Loop Limit Control
Dimensions (L x W x H) 710 x 560 x 1,400 mm (28 x 22 x 55”) Base machine
1,400 x 560 x 1,400 mm (55 x 22 x 55”) with Accumulator Speed Control Arm
2,090 x 600 x 1,400 mm (82 x 24 x 55”) with Inlet Accumulator & Accumulator Speed Control
410 x 310 x 1,040 mm (16 x 12 x 41”) Loop Limit Control
CE-Conformity The PreFeeder 3200 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility
Important Note Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.