PCB Unloader
The PCB Unloader is designed for unloading of PCBs, an arriving PCB is taken up by the attached conveyor and then pushed into the magazine by a specially designed pusher. The magazine indexes to the next position and is ready for the following unloading cycle.
Connect with SMT and AI productions line, safety design ensure not to break any PCB when it is pushed and thus reduce defect rate. Agility operation with high accuracy, automatic counting, fault alarm functions, it is required for a full range of automation equipment.
1. PLC Control system.
2. FUJI button, easily operation.
3. Four pitches selection ( 10, 20, 30, 40mm).
4. Direction from left to right or right to left (optional).
5. SMEMA compliant.
6. CE certified.
|
Model
|
U-170C Unloader
|
U-180C Unloader
|
U-200C Unloader
|
U-210C Unloader
|
|
Power
|
AC 110/220V ±10V, 50/60HZ
|
|||
|
Air Pressure
|
5kgf/cm2
|
|||
|
PCB Size
|
350x(50-250)mm
|
460x(50-330)mm
|
535x(50-390)mm
|
535x(120-460)mm
|
|
Transport Height
|
900 ±20mm
|
|||
|
PCB Direction
|
left to right or right to left (option)
|
|||
|
Magazine Rack Size
|
350x320x563mm
|
460x400x563mm
|
535x460x570mm
|
535x530x570mm
|
|
Pitches
|
10,20,30,40mm
|
|||
|
Machine Dimension
|
1700x760x1150mm
|
1800x820x1150mm
|
2000x850x1150mm
|
2100x960x1150mm
|