NS Novo 460

Novo™ 460

The Novo™ 460 offers exceptional value with superior process capabilities and is ideally suited for cell manufacturing. The Novo™ 460 has many unique features, including drop-jet fluxing, IR preheating and selective soldering with fast and easy programming and machine setup.

  • Choice of single or dual drop-jet fluxers and solder pots for either simultaneous parallel or independent double processing modes
  • Parallel processing significantly increases machine throughput while double processing broadens soldering flexibility
  • Software control between different solder alloys without changing solder pots
  • Standalone platform with combined fluxing, preheating and soldering requiring less than 3.6 square meters of factory floor space
  • Full titanium solder pots compatible with all solder alloys plus easy tool-free maintenance

Versatility

With its flexible configuration, the Novo™ 460 is a versatile selective soldering platform and can be equipped for either single, parallel or double processing. Use of a single drop-jet fluxer and solder pot allows soldering of printed circuit boards as large as 460 x 460 mm (18.1 x 18.1 in.).

When configured with dual drop-jet fluxers and dual solder pots, the Novo™ 460 can be used in two different modes and is capable of processing up to 2 boards at one time. The parallel processing mode enables fluxing and soldering of two printed circuit boards at the same time doubling machine productivity.

The double processing mode allows soldering with multiple size nozzles within the same program enhancing flexibility and increasing productivity. A single drop-jet fluxer and dual solder pots can be used in the double processing mode and is ideally suited for the use of two different solder alloys without requiring physical changing of solder pots.

Value

With a reputation for innovation, comprehensive process solutions from Nordson SELECT ensure a maximum return on investment and low cost of ownership. From initial process development through full-scale production, you are supported by our experienced worldwide engineering, applications development and technical service network.

Motion System

Z accuracy ±50 μm (0.002 in.)

Z repeatability (1): ±50 μm (0.002 in.), 3 sigma

Z velocity: 0.05 m/s peak (2 in./s)

X-Y accuracy ±50 μm (0.002 in.)

X-Y repeatability (1): ±50 μm (0.002 in.), 3 sigma

X-Y velocity: 0.2 m/s peak (8 in./s)

Computer

PC with Windows® operating system

Software

PhotoScan “point-and-click” programming editor and

machine control software

Solder Pot Capacity and Weight

Capacity (2): Approx. 12.0 kg (26.4 lbs.)

Total weight of tin-lead solder together with solder pot and

pump assembly (2): Approx. 22.4 kg (49.2 lbs.)

Total weight of lead-free solder together with solder pot

and pump assembly (2): Approx. 19.7 kg (43.3 lbs.)

Solderable Area (X-Y)

Single, parallel or double operating mode (3, 4):

Max. 460 x 460 mm (18.1 x 18.1 in.)

Board Handling Capability

Max. board size: 460 x 460 mm (18.1 x 18.1 in.)

Board Clearance

Max. overboard clearance: 120 mm (4.7 in.)

Max. underboard clearance: 40 mm (1.5 in.)

Facilities Requirements

System footprint: 1700 x 2104 mm (66.9 x 82.8 in.)

Compressed air: 6 bar min., 8 bar max.

Power (mains) (5): Power supply accommodates 3 phase,

400VAC, 50-60 Hz, 2-12 kW, 9-20 A

Nitrogen: 99.99% (4.0) pure, 4-6 bar, 1.3 m³/hour

(single pot), 2.6 m³/hour (dual pot)

Ventilation: Rear 150 m³/hour, 100 mm (4.0 in.) dia. duct

System weight (6, 7): 900 kg (1985 lbs.)

(1) Repeatability is measured at full rated system speed.

(2) Solder capacity and total weight of solder pot and

pump assembly varies depending on solder alloy.

(3) Board size is reduced when operating in parallel or

double modes

(4) Contact factory regarding smaller or larger

boards/carriers.

(5) Electrical power varies depending on configuration.

(6) System weight varies depending on configuration.

(7) Configuration dependent. Other configurations may

be available. Contact Nordson SELECT.

Windows is a registered trademark of Microsoft

Corporation in the United States and other countries.

Standards Compliance

SMEMA, CE