Needle control valve NCV-7DV
It is Suitable in fixed-quantity dispense of anaerobic liquid materials
・By wetted part fluoric resin Specifications, it is most suitable for fixed-quantity dispense of anaerobic liquid material.
・Needle control valve that fixed-quantity dispense of liquid material with filler is possible.
| Model | NCV-7DV-2P | ||
| Drive system | Air operation rate type | ||
| The smallest dispensing volume | 8μL | ||
| Adaptation viscosity | … 10Pa, s | ||
| Operation air Supply pressure is | 0.3 – 0.4MPa | ||
| Liquid material Supply pressure range | Up to 0.7MPa | ||
| Maximum reply number of times | 650 times of /min. | ||
| Connection diameter | Liquid material supply port | φ 6 X φ 4 Fluid feed coupling | |
| Liquid material discharge opening | Lure lock | ||
| Operation air | One-touch coupling for external diameter φ 6 tube (with speed controller) |
||
| Operating temperature limits | 5～50 degrees Celsius | ||
| Wetted part material | Fluoric resin, fluorine-containing rubber | ||
| Weight | 450 g | ||
| Adaptation liquid material | Anaerobic materials, materials with filler | ||
※ Dispensing volume of this Specifications, adaptation viscosity, adaptation materials, the greatest reply number of times are reference levels