Ambient Lamination
Either stage reverse system or roller system can laminate in the atmosphere without bubbles
Features
- For small panel
- DAM / FILL Dispense Coating
- Correspond to quantity production by 2 positions
- Coating pattern simple making software is included as standard
- Full support form Installation to starting-up
| Item | Standard |
|---|---|
| Target Size | Minimum 3.5 inch – Maximum 7 inch |
| Position Lamination Accuracy | ±0.05mm |
| Resin Coating Thickness | 50～200μm |
| GAP Accuracy | 50～149μm: ±15μm 150～200μm: ±10% |
| Coating Volume Accuracy | F.S Under ±3% |
| Tact | 3.5～5 inch: 30 sec 5～7 inch: 40 sec *Depend on resin, viscosity and work type |
| Power Source | Single phase AC200～240V 50Hz 6kVA |
| Pressure Air | CDA Over 0.5MPa Over 100L/min |
| Vacuum | Installed vacuum generator |
| Equipment Size | 1,620mmW*1,270mmD*1,900mmH |
| Equipment Weight | Approximately 1,000kg |
| Equipment Composition | DAM/ FILL coating, CCD auto alignment Work thickness measurement Auto lamination, UV precuring |